BELARUS-80.1/82.1
The tractor is intended for various agricultural operations with mounted, semi-mounted and trailed machines and implements, for hauling operations.
BELARUS-80.1 tractor with front axle.
BELARUS-82.1 tractor with front driving axle of portal type with bevel gear groups.
Environmental standard Stage II.
| Model | D-243S2 |
| Power, kW (h.p.) | 60 (81) |
| Wheel arrangement | 4х2/4x4 |
- Technical characteristics
| Engine | |
|---|---|
| Type | diesel engine with direct fuel injection |
| Model | D-243S2 |
| Power, kW (h.p.) | 60 (81) |
| Crankshaft rated speed, rpm | 2200 |
| Number of cylinders, pcs. | 4 |
| Displacement, l | 4,75 |
| Maximum torque, Nm | 298 |
| Specific fuel consumption at operating power, g/kWh | 244 |
| Factor of torque backup, % | 15 |
| Fuel tank capacity, l | 130 |
| Transmission | |
| Clutch | dry, single-disk |
| Gearbox | mechanical, fixed ratio |
| Number of gears: forward/reverse | 18/4 |
| Travel speed: forward/reverse, km/h | 1,9-34,3/4,09-9,22 |
| Rear PTO: | |
| continuous I, rpm | 540 |
| continuous II, rpm | 1000 |
| ground-speed I, rev/m of travel | 3,4 |
| Hydraulic lift linkage | |
| Remote-cylinder, with hydraulic lift providing draft, positional, mixed and height adjustment of agricultural implement position. | |
| Lifting capacity at suspension point, kg | 3200 |
| Maximum pressure, MPa | 20 |
| Pump performance,l/min | 45 |
| Hydraulic system capacity, l | 25 |
| Dimensions and weight | |
| Overall length, mm | 4120 |
| Width, mm | 1970 |
| Height to cabin top, mm | 2780/2800 |
| Tractor base, mm | 2370/2450 |
| Track, mm: | |
| front wheels | 1350-1850/1430-1990 |
| rear wheels | 1500-2100 |
| Agrotechnical clearance, mm | 645 |
| Least turning radius, m | 3,8/4,1 |
| Fordable depth, m | 0,85 |
| Operating weight, kg | 3770/4000 |
| Tire sizes: | |
| front wheels | 9,0-20/11,2-20 |
| rear wheels | 15,5R38 |
| Wheel arrangement | 4х2/4х4 |
Additional options
- Stage 0 engine (D-243);
- Stage I engine (D-243S);
- Metal-ceramic pads for coupling clutch;
- Reverse reduction unit;
- Ballast weights for rear wheels;
- Front ballast weights;
- Creeper;
- RLL draft control;
- Compound hitch device (hydraulic hook, draw bar, pendulum);
- Kit for twinning of rear wheels;
- Additional seat;
- Canopy frame, canopy base;
- Upgraded design (plastic facing);
- Air conditioner.
To order completing units address to the dealers in your region
Find a dealer