BELARUS-451

BELARUS-451

This tractor is intended for various agricultural operations coupled with mounted, semi-mounted and trailed machines, for hauling operations and for operations in industry.
Small dimensions, high road clearance, final drive with planetary gear group.
The BELARUS 451 tractor is built on the base on BELARUS 651 tractor.
Environmental standard Stage IIIa.

Where to buy
Model LOMBARDINI / CATERPILLAR
Power, kW (h.p.) 36,6 (50)/38 (51)
  • Technical characteristics
Engine
Type four-stoke diesel engine
Model «LOMBARDINI» LDW2204/CATERPILLAR C2.2 Gn51
Power, kW (h.p.) 36,6 (50)/38 (51)
Crankshaft rated speed, rpm 3000
Number of cylinders, pcs. 4
Displacement, l 2,2
Maximum torque, Nm 125/142,7
Specific fuel consumption at operating power, g/kWh 329/324
Factor of torque backup, % 15/17
Fuel tank capacity, l 45
Transmission
Clutch dry, single-disk
Gearbox mechanical, with easy-engagement clutches
Number of gears: forward/reverse 16/8
Travel speed: forward/reverse, km/h 1,3-40/2,3-21,6
Rear PTO:
continuous I, rpm 540
continuous II, rpm 1000 (+continuous III, PTO 540e)
ground-speed I, rev/m of travel 2,9
ground-speed II, rev/m of travel 5,4 or 3,7
Hydraulic lift linkage
Versatile, remote-cylinder
Lifting capacity at suspension point, kg 1700
Maximum pressure, MPa 20
Pump performance,l/min 40
Hydraulic system capacity, l 19
Dimensions and weight
Overall length, mm 3270
Width, mm 1675
Height to cabin top, mm 2260
Tractor base, mm 1900
Track, mm:
front wheels 1260,1410
rear wheels 1300, 1350, 1450, 1520, 1620
Agrotechnical clearance, mm 470
Least turning radius, m 3,8
Operating weight, kg 3000
Tire sizes:
front wheels 9,50-20
rear wheels 14.9R24
Wheel arrangement 4х4
Additional options
  • Front lift linkage;
  • Front PTO with shaft shank;
  • Front ballast weights;
  • Hitch hoses;
  • Bracket with cutoff clutches;
  • TSU-1M tow hitch (pendulum, hydraulic hook);
  • Economical PTO 540e.
To order completing units address to the dealers in your region
Find a dealer